Enhance solar panel lifespan with our high-quality Silicone Encapsulant. As a factory, we offer reliable and efficient solutions for PV module protection. Shop now!
Product Specification Hard Packing: 310ml Carton: 1x24 Pieces
Flexible Packing: 400~500ml Carton: 1x20 Pieces
5 Gallon Drum:25Kg
55-Gallon Drum Load: 270Kg
Product Overview The assembling of the photovoltaic module frame and laminated parts after lamination requiresclose coordination, strong connection, good sealability, and prevention of destructive liquidsand gases from entering. Connection boxes and backboards need to be well bonded, even iflong-term use under local stress page patching off. This product is a neutral curable siliconesealant specially designed and developed for the bonding requirements of solar photovoltaicmodule aluminium frame and junction box. It has excellent bonding performance, excellent agingresistance, and can effectively prevent the gas or liquid infiltration which has destructive effect. Product Characteristics 1.Excellent bonding properties, good bonding properties for special aluminum, toughened glass,composite backplane, PPO and other materials. 2.Excellent electrical insulation and weather resistance, can be used from-40C to 200C. 3.Neutral curing, non-corrosive to most materials, strong ozone resistance and chemicalcorrosion resistance. 4.Through the double "85" high temperature and humidity test, aging resistance test, cold-hottemperature differential impact test, it has the functions of yellowing resistance, moisture-proof,environmental corrosion resistance, mechanical shock resistance, thermal shock resistance andshock resistance. 5.Passed TUV, SGS,UL,ISO 9001/ISO14001 certification. Matters Needing Attention Storage in a cool and dry place with ventilation below 27 C for 12 months. Before use, the adhesiveforce test and compatibility test should be done according to the requirements of the company. Itshould not be used in base materials that leak grease, plasticizer or solvent, continuous immersion orwet place all year round, airtight place. When the surface temperature of the material is lower than 4Cor higher than 40C, sizing is not suitable. For standard construction requirements, please refer to
Product Overview The assembling of the photovoltaic module frame and laminated parts after lamination requiresclose coordination, strong connection, good sealability, and prevention of destructive liquidsand gases from entering. Connection boxes and backboards need to be well bonded, even iflong-term use under local stress page patching off. This product is a neutral curable siliconesealant specially designed and developed for the bonding requirements of solar photovoltaicmodule aluminium frame and junction box. It has excellent bonding performance, excellent agingresistance, and can effectively prevent the gas or liquid infiltration which has destructive effect. Product Characteristics 1.Excellent bonding properties, good bonding properties for special aluminum, toughened glass,composite backplane, PPO and other materials. 2.Excellent electrical insulation and weather resistance, can be used from-40C to 200C. 3.Neutral curing, non-corrosive to most materials, strong ozone resistance and chemicalcorrosion resistance. 4.Through the double "85" high temperature and humidity test, aging resistance test, cold-hottemperature differential impact test, it has the functions of yellowing resistance, moisture-proof,environmental corrosion resistance, mechanical shock resistance, thermal shock resistance andshock resistance. 5.Passed TUV, SGS,UL,ISO 9001/ISO14001 certification. Matters Needing Attention Storage in a cool and dry place with ventilation below 27 C for 12 months. Before use, the adhesiveforce test and compatibility test should be done according to the requirements of the company. Itshould not be used in base materials that leak grease, plasticizer or solvent, continuous immersion orwet place all year round, airtight place. When the surface temperature of the material is lower than 4Cor higher than 40C, sizing is not suitable. For standard construction requirements, please refer to
